How to Make a Red & White Cheer Bow

Welcome back to RibbonBazaar.com’s weekly DIY web series.

Today we’ll be making a cheer bow using a 3″ red grosgrain ribbon and 2-1/4″ red & white grosgrain mono stripes ribbon. We’ll also be using a strip of silver jewel ribbon to wrap around the center of the bow.

This is how the bow should look like right after it's been folded.
This is how the bow should look like right after it’s been folded.
Here's the finished cheer bow in front of the grosgrain ribbons used in this video.
Here’s the finished cheer bow in front of the grosgrain ribbons used in this video.

If you liked this video then please share it on your favorite social platform below:

Facebook
Twitter
Google+
Pinterest

transcript:
• Welcome back to RibbonBazaar.com’s weekly DIY webseries.
• This week we have a quick video on how to make a cheer bow.
• We’ll be using some 3 inch solid red grosgrain and 2 and a quarter inch red & white grosgrain mono stripes ribbon.
• We’ll also make use of a hot glue gun, scissors, 1/8 inch double faced satin ribbon, hair clip and a bit of silver jewel ribbon.
• We start by cutting 18 inch pieces of the grosgrain ribbons.
• We put some hot glue on the striped grosgrain in two lines as shown and press it against the solid grosgrain ribbon.
• Once joined, we fold the ribbon as shown and scrunch together the center to give it the correct look.
• We then string some of the 1/8 inch satin ribbon around it, knotting it in place and cutting the excess.
• We can now take a small strip of jewel ribbon and cut out to three rows of jewels.
• This will wrap around the center of the bow with the help of some more hot glue.
• Finally we take a hair clip and glue it to the opposite side of the cheer bow.
• And there you have it!
• If you liked this episode then please like, share and subscribe to our channel.
• And check out the description below for links to products shown in this video.
• See you next time!